Geo-Tec Flat Solar Panel Accessories
Solar Pump Station FLOW UNO/ DUO
The
GEO-TEC FlowUno solar station is a single-line solar pumping unit with all
the equipment necessary for operation. It installs in the return flow and
is equipped with a Wilo ST 25/6 pump. The pump can be completely shut off
by means of a ball valve built into the thermometer and by a tacosetter
that can be shut off, making it possible to replace the pump without much
involved.
The GEO-TEC FlowDuo solar station is a two-line solar pump station for forward and return flow. All the fittings necessary for operation are integrated. The forward-flow line and the pump in the return-flow line can be completely shut off.
The pumping unit is competely pre-assembled and inspected for
leakage.
| Fittings: | 2 gravity brakes Flowmeter Flushing and filling system Safety device Wall bracket Complete insulation |
| Safety device: | Safety valve, 6 bar Pressure gauge Connection for expansion tank to 60 litres |
| Pump: | WILO ST 25/6 (6-m delivery head) max. delivery rate: 3.5 m³ Installation length: 130 mm |
| Rated size: | DN 25 |
| Connections: | ¾" inside thread |
| Gravity brake: | Brass Integrated in thermal valves Cracking pressure: 20 mbar With FlowUno in the forward flow, customers must be very sure to install a fast-acting power brake! |
| Flowmeter: | Measuring range from 1 to 13 litres Suspended solid particles are used as the fast-acting power brake For precise regulation of solar collector systems |
| Fittings: | Brass |
| Seals: | EPDM/Tefon |
| Insulation: | EPP ? = 0.041 W/(m*K) |
| max. Pressure: | 10 bar |
| max. Temperature: | 120°, for brief periods 160°C |
| FlowUno: | Centre-to-centre distance 100 mm Width of insulation: 180 mm Height of insulation: 375 mm |
| FlowDuo: | Centre-to-centre distance 100 mm Width of insulation: 250 mm Height of insulation: 375 mm |
| Flow Duo Extras: | Built-in AIR STOP to degas the heat-transfer medium Forward flow and return with ball valves |
