Geo-Tec Flat Solar Panel Accessories
Filling and Flushing Station for Solar Collector Systems
A
compact flushing and filling station - A powerful centrifugal pump provides for rapid and clean filling of collector systems
- Built-in fine filter with sight glass
- Temperature-resistant hose to 60°C
- Handy hose rack
- Shut-off valve on canister drain
- Mounted on a sturdy, lightweight portable dolly
- A fine filter before the pump makes it not only possible to filter residue from soldering and welding out of the collector system, but also to detect air bubbles in the line in good time
- The canister is easy to remove for cleaning and has a wide opening with screw-cap
- On-site mixing in a clean container is possible when there is no ready-made medium available
Technical Specs on pump
| Pump: | Self-priming centrifugal pump Max. dry running: 1 min. incl. hoses for suction, pressure and flushing incl. screwed connections |
| Shaft: | Stainless steel |
| Casing: | Grey cast iron |
| Max. delivery rate: | 24.2 l/min |
| Max. pressure: | 5.9 bar |
| Motor: | 30 V, 1.7-m cable with plug |
| RPM: | 2850 min/-1 |
| Temperature: | max. 60°C continuous loading |
| Special features: | Built-in fine filter with sight glass Drains on the delivery side |
Technical Specs on Dolly:
| Material: | Welded, sturdy, shaped frame |
| Dimensions: | Without hoses: 102x46x55 cm (HxWxD) |
| Canister volume: | 30 litres |
| Canister: | UV-stable PE canister Wide opening for filling with screw cap Shut-off valve on drain |
